Rabljeni Lindner Traktoren Lintrac 90

The Lindner Lintrac 90 is produced since 2013 and, according to the manufacturer, combines performance and maneuverability. The 3.4m long, 2.1m wide and 2.4m high Lintrac 90 reaches a dead weight of only 3,750kg, among other things through the 102 HP strong Perkins four-cylinder, the installed TMT09-ZF-CVT (continously variable transmission) and the used comfort cabine. The Turbo diesel engine with common rail direct fuel injection possesses a 3.4 l high displacement and achieves the maximal torque of 420 Nm at 1,400 rpm. The previously mentioned gear unit brings the Lindner Lintrac 90 to its top speed of 40 km/h. The powershiftable wheel function can be switched on via the touch of a button. Next to the standard rear PTO with 430/540/750/1000 rpm for the Lintrac 90, a stationary ground speed PTO is optionally available. The Lindner Lintrac 90 carries a front axle load of 3,000kg, whereas the rear axle load may amount to 3,800kg at most. The payload of the Lintrac 90 tractor lies at 2,650kg due to the total permissible weight of 6,400kg. The axial piston pump of the hydraulic system delivers an oil flow of 88 l/min, the handling of the accessory equipment of the Lintrac 90 takes place through the multi-function joystick, integrated in the arm rest. The comfort cabine of the Lindner Lintrac 90 lives up to its name: the driver cabine is designed with panorama glazing, ROPS and FOPS, adjustable windscreen, rear and side windows, LED indoor lighting and sun protection screens, thereby optimally suitable for all work situations. The driver of the Lintrac 90 tractor does not miss out either: the air-suspended comfort seats, the heating and ventilation system, a phone socket as well as plenty storage options make working in the Lindner Lintrac 90 a unique comfort experience.