Ponudba je bila dodana kot priljubljena. Priljubljene ponudbe lahko prikličete prek menijskega elementa »tpWeb.frontend.global.navigation.myTraktorpool«.
Kverneland3632 FT Front Mounted Disc Mower Conditioner - £POA
Cena po ponudbi
Interna sklicna številka
Manufacturers Warranty available
Working width 3.16m
Working Width 3.16m
Number of Discs 8
Conditioner - SemiSwing Steel Tines
Power Requirements, min. 60/80 kW/hp
The SemiSwing conditioner system combines the aggressive conditioning seen from fixed fingers with the excellent tine protection typically associated with free swinging tines.
During normal operation the tines are fixed for effective conditioning, but if a SemiSwing tine comes into contact with an obstacle, force will exceed 22kg (48.5lbs) and it will spring back and leave a generous space for the obstacles up to 103mm to pass.
The complete conditioner tine has been redesigned to move the centre of gravity. The result is that the tine will stay in position when hitting the crop, to give full conditioner effect and to minimise wear and tear on the turning points.
The angle and position of the SemiSwing tines give a better crop transport. The crop is moved away from the conditioner rotor, resulting in reduced risk of blockages and full effect of the conditioner plate.
Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
The fully welded cutterbar gives a very stiff and strong design for high durability.
With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.
The Kverneland ActiveLift system ensures maximum protection of the cutterbar during operation. If hitting a stone or foreign obstacle, a three-fold action takes place simultaneously.
1. The cutterbar will move back and up, due to the geometry of the suspension.
2. Tension in the ground pressure springs increases, adding additional lift to the mowing section, which helps to clear the obstacle.
3. The angle of the cutterbar repositions from 4° downwards to horizontal, for better clearance of the obstacle.
Located at our Southam branch
Order # SW11382
Brezplačno in brez obveznosti - prejmite ponudbo za prevoz od logističnih partnerjev traktorpool